配電柜容易出現以下一些問題
1. Don't switch on, this problem occurs mostly under the sub gate operation, generally only maintenance or power failure of tripping operation, can or is caused by the short circuit switch, you can treat them separately, can not be electric closing, mostly fault line access or loose, or closing button bad contact, in determining not is the reason, the maximum possible is closing coil is damaged, only to be replaced. If it is not be able to manually closing, then most of the mechanical reasons, like bad may also cause can not be manually closing contact closing button above.
1。不能合閘，這個問題大多發生在分閘操作下，一般只需檢修或電源故障的跳閘操作，可以或是由短路開關造成的，你可以單獨處理，不能電閉，大多故障線路接入或松動，或關閉按鈕壞接點，在確定不是原因，大可能是關斷線圈損壞。如果是不能夠手動關閉，那么大部分機械原因，如不好也可能導致無法手動關閉觸點閉合按鈕。
2, can not brake, cannot cause the opening and closing and closing can not basically the same, are examined by the above method.
2、不能分閘，不能使開閉與關不能基本一樣，由上述方法檢驗。
3, the measurement is not allowed, in the power distribution cabinet, we will encounter uncertainty, the reason may be the line is wrong, will protect the line from the current transformer, because of the accuracy of protection, to solve the method to correct wiring, the protection of wiring, and power distribution cabinet is equipped with a transformer.
3、計量不準，在配電柜中，我們會遇到不確定因素，可能是線路錯了，會保護線路從電流互感器，因為保護的準確性，要解決正確的接線方式，保護線路、配電柜都配有變壓器。
4, indicating the class is not bright or burned, the problem is mostly caused by the wiring error, the line is connected to the wrong indicator is not bright, of course, this situation is mostly caused by the fault of the field debugging and recovery, Shanghai Xing broadcast electrical manufacturers in the factory have done a test to eliminate this problem. Burning may also be the wrong line, such as AC voltage is too large and burned.
4、表示類是不亮或燒，問題主要是由接線錯誤造成的，線路連接到錯誤指示燈不亮，當然，這種情況主要是由故障引起的現場調試和恢復，上海金勒電氣成套設備有限公司做了一次測試，以消除這個問題。燃燒也可能是錯誤的路線，如交流電壓過大，燒毀。
The above simple summary of the distribution cabinet in the operation of the easy to out of the problem, of course, will be more in the future will be mentioned, for power distribution cabinet to do a good job in the daily maintenance work, can not put any debris, cable head, wiring head, keep clean at the same time according to the operation manual operation, in order to avoid some unexpected problems.
以上簡單的配電柜在運行過程中容易出問題，當然會有更多的未來會被提及，供配電柜在日常維護工作中做好工作，不能把任何雜物，電纜頭，接線頭，保持干凈，同時根據操作手動操作，以免出現一些意想不到的問題。
