不銹鋼配電箱安裝問題：
1, not according to the requirements of the drawings or inappropriate selection. As is well known, there are no certain problems in accordance with the rules, how can the stainless steel distribution box exception? You said that, in the choice of stainless steel distribution box, must be in accordance with the requirements to do, otherwise the problem will be.
1，不按圖紙要求或不恰當?shù)倪x擇。眾所周知，沒有一定的問題，按照規則，如何能在不銹鋼配電箱的例外？你說，在不銹鋼配電箱的選擇，必須按照要求去做，否則問題將。
2, stainless steel distribution box body skin is too thin, stiffness, resulting in serious deformation of the shell and facade, close the gap is too large. Such a situation can be very large, mainly because of the stainless steel distribution box application thickness does not meet the requirements, this we need to pay attention, choice, thickness of box application with in compliance with the requirements.
2，不銹鋼配電箱體的皮膚太薄，剛度，導致外殼和門面嚴重變形，關閉間隙太大。這種情況可能會非常大，主要是因?yàn)椴讳P鋼配電箱應用厚度不滿足要求，這需要我們注意的是，選擇，以符合客戶要求的盒應用厚度。
3, some of the electrical appliances in the box, the specifications do not meet the design requirements.
3，一些盒子里的電器，規格不符合設計要求。
4, there is no grounding and the zero bus line, or connected to the zero bus size is small, can not meet the use requirements.
4，沒有接地和零線，或接零母線尺寸小，不能滿足使用要求。
5, some power distribution box without isolation and protection, part of the protection board is not equipped with insulation or hard combustible material.
5，一些配電箱無隔離和保護，該保護板部分沒有配備絕緣或難燃材料。
以上資訊由上海金勒電氣成套有限公司，歡迎廣大新老顧客前來選購！
